Front Spindles:
Martin: I hope this is legible. Let me know what you think.
The front number plate bracket:
Pictures are thumbnails - Click on picture for full size
The part pictured above came with TC 1576. TC 8192 did not have anything on the front. I thought this was probably an original part, however it could be something manufactured by a previous owner. I am also wondering if this might be an original EXU part. The hole center for the outside set of holes is the same as a British number plate. The bolts which are tack welded into the bar are the same hole center as many American plates.
=====================================================================================================
The three water elbows:
The one on the left is aluminum and is the one which came on my car. Angle is 78 degrees. Application is unknown!
The one in the middle is aluminum and came from Moss. Angle is 72 degrees. Application is stated for MG-TC.
The one on the right is cast iron I think. I believe it is from a TD but am not sure. Angle is 64 degrees.
The left one is the real odd ball. Note the distance from the bottom of the flange to the surface of the block is with it.
Transmission cover
Click on a picture for a full size:
Left Side: Right Side: Dipstick:
MG SPARK PLUG INSULATOR? Has anyone ever seen one of these? If so please tell me where you can buy them. Thanks. Send me an email please. 49mgtc@usaviator.net
.jpg)
MG TC drop arms. Why are they different.
TO SEE THE METHOD I USED TO SET
TO SEE THE TRAILER I BUILT FOR MY TC CLICK HERE
PICTURES OF MGTC SLOW RUNNING CABLE CONNECTIONS
CLICK ON A PICTURE FOR A LARGER VERSION
PICTURES OF MGTC PETROL GUAGE
